Airflow enthusiast 3D-prints 15 tiny fans to fit inside a custom, domed Noctua NF-A12x25 frame — bizarre ‘Fanhattan Project’ cools the CPU just as well as a reg

by

Airflow enthusiast 3D-prints 15 tiny fans to fit inside a custom, domed Noctua NF-A12x25 frame — bizarre 'Fanhattan Project' cools the CPU just as well as a reg

When you purchase through links on our site, we may earn an affiliate commission. Here’s how it works .

Every now and then, you come across a PC hardware experiment that dares to reach beyond efficiency. What if you tried to create something that performs as well as what inspired the idea, but without any of the sterile, boring factory polish? That's what YouTuber Major Hardware just did with his new project — he combined 15 tiny fans to form one giant one that looks like Noctua 's legendary NF-A12x25… and perhaps also an early atomic bomb.

Watch On There was no Eureka moment behind the idea; the YouTuber just decided to build this contraption for fun after seeing those self-balancing toy drones you can find online. They have a bunch of little propellers inside that move a lot of air, so the same logic can be applied to a much larger device, like an actual PC fan, such as the Noctua NF-A12x25. The project thus began with 7500 RPM 4.5V DC motors bought from Amazon .

You may like PC Fan Faceoff: Can Arctic's $8.50 P12 Pro compete with the $35 Noctua NF-A12x25 G2? AMD's 96-core beast with watercooling engraved into CPU joins car and industrial parts in a 2,000W direct die cooling setup 100W car amplifier hacked into a custom RTX 3080 heatsink Image credit: Major Hardware on YouTube

This was the point where this fan started to look more like the Gadget that was created at Los Alamos. Major attached the fans to their motors, and the motors went inside little slots that sat inside crater-like cutouts. They were friction-fitted in the structure, with wires dangling from each of the fifteen fans. But since this project's one goal was to maintain airflow, the YouTuber decided to reroute all those cables.

Each of those wires was run up and out of the intrados through tiny holes. Then they were bundled up and connected to some winding wire on the surface. The end result looked an awful lot like the first atomic bomb used in the Trinity test, as stated by the YouTuber himself. But the mission to keep the insides clear of any potential chokepoints was successful, and it was now time for testing.

(Image credit: Major Hardware on YouTube) (Image credit: Major Hardware on YouTube) (Image credit: Major Hardware on YouTube) The 'Fanhattan Project' was connected to a power supply, and it spun to life right away, moving a significant amount of air. Unfortunately, we didn't get exact cubic feet numbers, but the fan did reach 73 dB while running. And that remains consistent because there's no PWM control here; the fan (fans?) runs at full speed the whole time, so how well can it actually cool a CPU?

The test bench consisted of a Noctua NH-U12A mounted atop a Core i7-7700K running at 4.9 GHz for 20 minutes. Using the NF-A12x25, the CPU reached 69.5 degrees Celsius while the Fanhattan Project kept it limited to "just" 69 degrees. That's just a 0.6% difference, which means it's within the margin of error, and the entire experiment is thus deemed a success — same performance for more than triple the noise. Worth it.

Get Tom's Hardware's best news and in-depth reviews, straight to your inbox.

Key considerations

  • Investor positioning can change fast
  • Volatility remains possible near catalysts
  • Macro rates and liquidity can dominate flows

Reference reading

More on this site

Informational only. No financial advice. Do your own research.

Related posts:

  1. PC Fan Faceoff: Can Arctic’s $8.50 P12 Pro compete with the $35 Noctua NF-A12x25 G2?
  2. PC Fan Faceoff: Can Arctic’s $7 P12 Pro compete with the $40 Noctua NF-A12x25 G2?
  3. PC Fan Faceoff: Can Arctic’s $8.50 P12 Pro compete with the $35 Noctua NF-A12x25 G2?
  4. PC Fan Faceoff: Can Arctic’s $7 P12 Pro compete with the $40 Noctua NF-A12x25 G2?

Leave a Comment