When you purchase through links on our site, we may earn an affiliate commission. Here’s how it works .
(Image credit: TrashBench on YouTube) We're back with another classic from TrashBench, the ingenious modder who has previously dunked GPUs into transmission fluid to cool them. Perhaps that's not very convenient, so why not try something far more feasible and, maybe even genuinely practical? Taking an air cooler, dismantling it, and turning it into a Frankenstein AIO that can tame GPUs like it's a walk in the park.
Watch On Our journey starts with a Thermalright Peerless Assassin , a competent cooler on its own, but clearly, there's room for improvement. One by one, the fins from its heatsink are removed until the heatpipes running through the finstack are exposed just enough. Then, a disc cutter is carefully run through the top to get access to the magic sauce.
For those unaware, the heatpipes inside an air cooler are hollow, with a small amount of liquid inside that evaporates and condenses during heat cycles, acting as a phase-change system. That's enough to cool a CPU when combined with fans on either side. So, when we cut the tops off the pipes, we see channels inside leading directly to the base plate, which enables this madness.
(Image credit: TrashBench on YouTube) (Image credit: TrashBench on YouTube) Thin water tubes are connected and secured to these pipes, and once initial leaks are fixed, a pump at the other end successfully injects green-colored water through them, bringing this custom apparatus to life. It's time for testing, and an MSI RTX 3070 is the first recipient of this honor.
After being stripped down to expose the die, the DIY cooler is retrofitted on top with surprising conviction, and the whole thing is put on a test bench. On the side is a portable ice chiller, on which a 12V diaphragm pump is mounted to power the entire setup. Once turned on, ice-cold water flows through the heat pipes, touching the 3070's GPU, which sits at a casual -14 degrees Celsius.
Owing to his name, TrashBench runs a bunch of games and benchmarks on this new below-zero RTX 3070 , and compared to the stock results, we see an average 10% uplift across the board. The unlocked cooling headroom enables a +320 MHz overclock that delivers decent improvements, but it's not drastic.
Get Tom's Hardware's best news and in-depth reviews, straight to your inbox.
Key considerations
- Investor positioning can change fast
- Volatility remains possible near catalysts
- Macro rates and liquidity can dominate flows
Reference reading
- https://www.tomshardware.com/pc-components/gpus/SPONSORED_LINK_URL
- https://www.tomshardware.com/pc-components/gpus/cpu-air-cooler-runs-ice-cold-water-through-its-heatpipes-to-liquid-cool-a-gpu-negative-temp-diy-mod-sees-up-to-17-percent-performance-uplift#main
- https://www.tomshardware.com
- Avoid sky-high DDR5 prices and save $150 with this Asus B850 board and 16GB Team Group RAM bundle deal
- Senators lobby for SAFE Chips Act, which would curb leading-edge AI chip exports to China — proposed bill would restrict AMD and Nvidia to H20/MI308-class accel
- AI On: 3 Ways Specialized AI Agents Are Reshaping Businesses
- Intel admits it needs more Core Ultra 200-series wafers — 'If we had more Lunar Lake wafers, we would be selling more Lunar Lake'
- Mixture of Experts Powers the Most Intelligent Frontier AI Models, Runs 10x Faster on NVIDIA Blackwell NVL72
Informational only. No financial advice. Do your own research.