Follow Tom's Hardware on Google News , or add us as a preferred source , to get our latest news, analysis, & reviews in your feeds.
Hassam Nasir Social Links Navigation Contributing Writer Hassam Nasir is a die-hard hardware enthusiast with years of experience as a tech editor and writer, focusing on detailed CPU comparisons and general hardware news. When he’s not working, you’ll find him bending tubes for his ever-evolving custom water-loop gaming rig or benchmarking the latest CPUs and GPUs just for fun.
derekullo I'd always assumed blowers were the most efficient / loudest way to cool down a chip using air. Especially if you had a way to vent the hot air directly outside Reply
hotaru251 derekullo said: I'd always assumed blowers were the most efficient / loudest way to cool down a chip using air. Especially if you had a way to vent the hot air directly outside in confined spaces i believe so (so server racks) but in actual pc cases and places w/ room to breathe multi fan were better especially as they started to improve the actual cooling from die to heatsink/pipes. I just recall hearing somewhere that Nvidia actually stopped allowing 3rd party vendors from making blower style as they wanted to keep the cheaper gaming cards from being used in servers (which they sold at a much more costly product) Reply
jlake3 I used to always run blower coolers because the airflow path made more sense to me (and I needed to put expansion cards in nearby slots), and I feel like the "hairdryer" derision was blown way out of proportion. At 300 watts they can be screaming to keep up… but most cards back then weren't 300 watts. At lower power they were fine, especially ones that used vapor chambers to spread the heat out to the fin stack, although heatpipe designs weren't bad either. I'm not exactly sure what the wattage was, but there was a certain point where you could get way with a cheap extruded aluminum open-air cooler but not the same cheap fins in a blower, which created a marketing incentive to push more 2-fan coolers and ship less blowers at the low end. At the high-end and even midrange, cards started pushing higher TDPs after the GTX 10-series, and cards didn't just need to switch from blower to open-air but also got taller and thicker and longer. Reply
Key considerations
- Investor positioning can change fast
- Volatility remains possible near catalysts
- Macro rates and liquidity can dominate flows
Reference reading
- https://www.tomshardware.com/pc-components/gpus/SPONSORED_LINK_URL
- https://www.tomshardware.com/pc-components/gpus/nvidias-blackwell-gaming-gpus-go-through-blower-style-transformation-to-fuel-ai-data-centers-rtx-5080-rtx-5070-ti-rtx-5060-ti-blower-gpus-up-for-purchase-in-china#main
- https://www.tomshardware.com
- Newegg bundles 16GB of DDR5-6000 RAM with Asus AM5 B850 mobo for under $240 — get 41% off and save $169.99 with this all-white combo
- Newegg bundles 16GB of DDR5-6000 RAM with Asus AM5 B850 mobo for under $240 — get 41% off and save $169.99 with this all-white combo
- NVIDIA Rubin Platform, Open Models, Autonomous Driving: NVIDIA Presents Blueprint for the Future at CES
- Researchers turn spoiled milk into 3D printing materials — extracted proteins from dairy waste combined with polymers to create plastic alternative
- AMD leaves the door open to experimental FSR Redstone support on RDNA 3
Informational only. No financial advice. Do your own research.