Segotep’s Titanload 12V-2×6 cables use heavier-duty pins to prevent meltdowns — brute-force approach purportedly drops peak temps by up to 72%

Segotep's Titanload 12V-2x6 cables use heavier-duty pins to prevent meltdowns — brute-force approach purportedly drops peak temps by up to 72%

Under the suicide test, the Titanload EX cable maintained hotspot temperatures below 95 degrees Celsius, whereas the standard 12V-2×6 cable surpassed 120 degrees Celsius. Notably, there was only a 5% difference between the Titanload cables.

Citing Arrhenius' equation, which states that the failure rate doubles for every 10 degrees Celsius increase in temperature, the Titanload cable has a thermal failure rate of 6.5%, and the Titanload EX cable, with 1.2%, is under a standard load of 669W, that of the 12V-2×6 cable.

Segotep will incorporate the Titanload cables with the company's forthcoming Titanload power supplies intended for Nvidia's GeForce RTX 50 (codenamed Blackwell) series and subsequent products. Nevertheless, the company has not yet confirmed whether the Titanload cables will be sold separately.

Segotep is not the first brand to try to seek a solution to prevent meltdowns of the 12VHPWR and 12V-2×6 connectors. Numerous companies have endeavored to address this issue. Superficial efforts include coloring the connector to help users ensure correct insertion, while more sophisticated solutions use devices that monitor power usage or provide load balancing . Additionally, the DIY community has proposed innovative workarounds . It remains to be seen whether Segotep's brute-force attempt will have any greater success in preventing failures.

Follow Tom's Hardware on Google News , or add us as a preferred source , to get our latest news, analysis, & reviews in your feeds.

Zhiye Liu News Editor, RAM Reviewer & SSD Technician Zhiye Liu is a news editor, memory reviewer, and SSD tester at Tom’s Hardware. Although he loves everything that’s hardware, he has a soft spot for CPUs, GPUs, and RAM.

TechieTwo Assuming equal metal resistance, it all boils down to pin contact area. Even solid copper pins with minimal contact area can overheat. As the contacts heat up the electrical resistance increases causing a snowball effect that results in failure. Obviously for 9+ amps the pin contact area should have been increased because you rarely get ideal terminal contact in these push fit connectors. Reply

nimbulan I'm really curious how they're accomplishing this. There's not exactly a lot of space to work with in these tiny connectors to fit more robust terminals inside. Reply

King_V I'm curious at to whether the rest of the Segotep PSU is up to the task. Unless they've changed in the past couple of years, weren't they generally considered a dumpster-fire level of quality? Reply

thisisaname TechieTwo said: Assuming equal metal resistance, it all boils down to pin contact area. Even solid copper pins with minimal contact area can overheat. As the contacts heat up the electrical resistance increases causing a snowball effect that results in failure. Obviously for 9+ amps the pin contact area should have been increased because you rarely get ideal terminal contact in these push fit connectors. Just what I was thinking it does not matter how solid the pins are if the contact between socket and pins is poor. Reply

User of Computers how about some load balancing on those pins? Reply

Key considerations

  • Investor positioning can change fast
  • Volatility remains possible near catalysts
  • Macro rates and liquidity can dominate flows

Reference reading

More on this site

Informational only. No financial advice. Do your own research.

Leave a Comment