When you purchase through links on our site, we may earn an affiliate commission. Here’s how it works .
The first thing that Zac Builds did was to disassemble the mini-PC — an AtomMan G7 PT — to take measurements and 3D-print the base that will hold the components to the back of the fan. They then disassembled the fan’s rear cover and 3D-printed four heavy-duty brackets to hold the mini-PC’s base to the fan while also guiding the airflow through the computer. While the initial base was a single flat sheet of plastic with standoffs to hold the various PC parts, the final version had cutouts to help improve airflow.
With the computer mounted on the Dreo 519S, Zac Builds 3D-printed the brackets and external case that will protect the components and ensure that air goes through the system. They initially made this into four parts (two parts for the brackets and two more for the face plates) but discovered a gap between the two face plates where air could seep through, thus ruining the flow. So, for their second iteration, they 3D-printed the face plate as one single unit and also added vent holes over the PC’s heatsink for more efficient cooling. The face plates also feature five I/O ports to allow the PC to connect to their TV and other peripherals, although we imagine that they preferred wireless connectivity as it’s kind of weird to have a bunch of wires plugged into your living room fan. Finally, to avoid having a power brick dangling from the back of the appliance, Zac Builds added a 3D-printed base that hid the power unit and threaded the mini-PC’s power cable inside the fan’s housing.
The completed build successfully hid the mini-PC, with the only hint from the front that there’s something different with the living room fan being the tiny box attached to its side and the single HDMI cable connecting it to the TV. It also had the added benefit of reducing the computer’s fan noise by around 10 to 15 dB because of the additional airflow that the stand fan brings to the table. The only issue that we see here is that you can’t use the fan elsewhere if you want to play games on your living room TV.
Enthusiast builds a PC big enough to live in
Key considerations
- Investor positioning can change fast
- Volatility remains possible near catalysts
- Macro rates and liquidity can dominate flows
Reference reading
- https://www.tomshardware.com/3d-printing/SPONSORED_LINK_URL
- https://www.tomshardware.com/3d-printing/enthusiast-hides-gaming-pc-inside-living-room-fan-using-3d-printed-parts-disassembled-atomman-g7-cooled-by-dreo-tower-fan-that-shifts-air-at-28-feet-per-second#main
- https://www.tomshardware.com/subscription
- Save up to 71% on HP gaming desktops and laptops this July 4 — weekend sale could land you a gaming PC for less
- NVIDIA Brings Trusted, 24/7 AI Agents to Telecom Operations
- GitHub thumbs nose at Sony's controversial end to physical media with its introduction of Repo CDs — offers limited run of 1,000 CD-ROM copies of public GitHub
- NVIDIA Unlocks AI Compute at Scale, Inviting Partners to Power the AI Infrastructure Buildout
- Brand new Steam Machine hit with 'red line of death' GPU failure after playing No Man's Sky for just five minutes — console 'bricked itself' following update in
Informational only. No financial advice. Do your own research.