When you purchase through links on our site, we may earn an affiliate commission. Here’s how it works .
The irony is not lost on us that NBA 2K27 is the only game that officially supports DLSS 5 right now — everything else is modded — yet it still reportedly killed the user's MSI RTX 5090 Gaming Trio OC, which carries a 575W TDP. However, during testing, erek reported his GPU going past 600W, with GPU-Z showing it hovering above 610W consistently, not just as a spike. Before this, the card only consumed around 450W while gaming, implying that DLSS 5 added more than 150W to the power draw.
While the 16-pin connector is capable of carrying up to 600W of power, the PCIe x16 slot the card is plugged into also provides 75W on its own. So, the connector wasn't necessarily drawing over 600W alone. Tragedy struck right after as Erek's RTX 5090 started exhibiting signs of instability and eventually stopped working entirely. The owner smelled something burning and, sure enough, found the 16-pin connector pulling an age-old classic: melting.
The plastic on the connector had melted enough to bond with the cable, making it very difficult to separate the two. Once they did come undone, the damage was clearly visible, with at least five pins on the 16-pin cable scorched; one pin's housing had completely melted away. This was a yellow-tipped cable, too , meant to ensure it was plugged all the way in. Despite the fact that we only got a blurry picture of the connector on the GPU, the little yellow dot of melted plastic almost comically stands out amidst a sea of black and grey.
(Image credit: erek on HardOCP Forums) (Image credit: erek on HardOCP Forums) Image 1 of 2 View Original
We can't confirm whether DLSS 5 was actually responsible for burning Erek's card. After all, an RTX 5090 meeting its maker is a monthly tradition at this point , and the cause is usually tied to a loose fit between the connector and the cable. However, our own testing does align with how the enthusiast came up with their DLSS 5 hypothesis. We saw the MSI Lightning Z variant of the 5090, which has 2x 16-pin connectors and a 1,000W XOC BIOS, pull 800W in Control with DLSS 5 enabled. Without DLSS 5, the same GPU pulled just 691W.
Modders solder power cables directly to RTX 5090 PCB to eliminate notorious melting 16-pin connector
We explored early DLSS 5 performance with community mods
Key considerations
- Investor positioning can change fast
- Volatility remains possible near catalysts
- Macro rates and liquidity can dominate flows
Reference reading
- https://www.tomshardware.com/pc-components/gpus/SPONSORED_LINK_URL
- https://www.tomshardware.com/pc-components/gpus/enthusiast-says-dlss-5-pushed-rtx-5090-past-600w-and-melted-the-16-pin-connector-nvidias-neural-rendering-tech-adds-up-to-50-percent-more-power-draw-in-testing#main
- https://www.tomshardware.com/membership
- ‘World’s first fully transparent video game console’ is on its way to Kickstarter — Arduview handheld’s shell, PCB, and display are all transparent
- Enthusiast says DLSS 5 pushed RTX 5090 past 600W and melted the 16-pin connector — Nvidia's neural rendering tech adds up to 50% more power draw in testing
- Sparks Fly: NVIDIA Accelerates Local AI at IFA 2026
- HyperX Omen 15 review: Strong gaming performance and colorful OLED display, with obvious cost-cutting measures
- Sales of CD and vinyl music sees strong resurgence amid physical media backlash — US sales of ‘retro media’ were up 59% and 18%, respectively, in H1 2026
Informational only. No financial advice. Do your own research.