HyperX Omen 35L review: A polished gaming PC for deep pockets

HyperX Omen 35L review: A polished gaming PC for deep pockets

The system also supports two M.2 2280 drives. The primary slot is covered in a substantial heatsink just above the RTX 5080. Accessing the other slot requires removing the RTX 5080. The card is secured with five screws, two of which hold it to the front support bracket. Deft fingers are required to reinstall the screws at the back of the card.

HP’s wiring work is tidy for a mainstream tower. Sleeved cables would have improved the refinement. On the plus side, HP includes a fully modular power supply, an uncommon feature in big box systems.

We tested the HyperX Omen 35L in a maxed-out configuration featuring a Ryzen 9 9950X3D processor, 64GB of RAM, and a GeForce RTX 5080.

I fired up 007 First Light to test out this system’s prowess. At a 3840 x 2160 resolution with high settings and post effects enabled, I saw up to 120 frames per second (fps) indoors and in the mid-90 fps range in more complex scenes without DLSS. The game never stuttered and remained supremely playable.

The systems we’re using for comparison include a pair of RTX 5090 towers, the Alienware Area-51 (Ryzen 9950X3D, $5,749.99 when tested, $8,899.99 as of this writing) and the Maingear MG-1 (Ryzen 9 9950X3D2, $7,067 when tested, $9,076 as of this writing), plus Corsair’s Vengeance a7500 powered by a Ryzen 7 9800X3D and an RTX 5070 Ti ($2,799.99 when tested, $3,299.99 as of this writing). With its RTX 5080, the HyperX desktop ought to slot in the middle of this group.

(Image credit: Tom's Hardware) (Image credit: Tom's Hardware) (Image credit: Tom's Hardware) (Image credit: Tom's Hardware) (Image credit: Tom's Hardware) (Image credit: Tom's Hardware) Image 1 of 6 View Original

The HyperX desktop performed as expected given its RTX 5080. That said, the 1080p numbers show significant variance from system to system. In Shadow of the Tomb Raider (Highest detail preset), the HyperX produced 300 fps to outperform even the Alienware (248 fps), though it couldn’t catch the Maingear (355 fps). In other instances, even the RTX 5070-powered Corsair was able to pull ahead as seen in Far Cry 6 (Ultra settings), where it produced 197 fps against the HyperX’s 141 fps.

But these desktops are designed for 4K play. At that resolution, the HyperX’s RTX 5080 produced admirable numbers. Naturally, it wasn’t in the same league as the RTX 5090 systems; in Red Dead Redemption 2 (Medium settings), the HyperX produced 83 fps against the Alienware’s 122 fps and the Maingear’s 121 fps, and in Borderlands 3 (Badass settings), the HyperX landed at 115 fps against Alienware’s 166 fps and Maingear’s 186 fps. The differences narrowed in Far Cry 6 , with the HyperX producing 118 fps to Alienware’s 128 fps. The largest deltas were seen in Cyberpunk 2077 (Ray Tracing Ultra preset), where the HyperX produced 36 fps, well ahead of the Corsair’s 29 fps, but significantly behind the Alienware’s 55 fps. Overall, though, this HyperX desktop is well-suited to 4K play.

We stress-test gaming desktops running 15 loops of the Metro Exodus benchmark at RTX settings, simulating about half an hour of gameplay. During the test, the HyperX desktop averaged 172.21 fps across all runs with a sub-one fps variance, indicating stable performance. During the test, the Ryzen 9 9950X3D averaged 4.79 GHz and 48 degrees Celsius while the RTX 5080 ran at 2.74 GHz and 50 C.

Our HyperX test unit features a Ryzen 9 9950X3D processor, 64GB of RAM, and two 1TB PCIe 5.0 drives running separately, one hosting the OS andthe other for storage.

(Image credit: Tom's Hardware) (Image credit: Tom's Hardware) (Image credit: Tom's Hardware) Image 1 of 3 View Original

Featuring the same Ryzen 9 9950X3D processor, the HyperX and Alienware systems performed similarly across our CPU tests. In Geekbench 6, the HyperX system produced 19,923 points against Alienware’s 20,411 points, though it was handily outperformed by the Ryzen 9 9950X3D2-powered Maingear, at 23,741 points. With fewer cores, the Ryzen 7 9800X3D-powered Corsair finished last, at 18,124 points.

The HyperX desktop finished our Handbrake 4K-to-1080p video transcoding test in 1 minute and 47 seconds, tying the Alienware, though the Maingear edged ahead, at 1:32. The Corsair took nearly twice as long, at 3:02.

In our 25GB file transfer test, the HyperX’s average transfer speed of 3,197.42 MBps was excellent, just behind Alienware’s 3,414.29 MBps and ahead of the Corsair’s 2,659.94 MBps and Maingear’s 2,782.43 MBps.

HP includes several useful apps. Omen Gaming Hub app provides performance control, with per-fan RPM settings and, in Extreme mode, PPT and EDC settings for the Ryzen 9 CPU. The Advanced Performance Tuning section also provides PBO, CPU Boost, and voltage curve controls plus a benchmark to test your settings. For quick access, the app provides an overlay that shows your power profiles and system monitoring, including component temperatures and fan speeds.

Gaming Hub also provides customization of the LCD display on the liquid cooler. Many faces are available, from system monitoring to static images, GIFs, videos, and a clock. It seems simple, but it’s one of the most fun features of the system, allowing you to easily change up the look.

Lighting is managed through Omen Light Studio, which provides per-device RGB control. Fine control is possible – each of the five fans has 10 LEDs, which are individually selectable. Clicking and dragging selects multiple fans and LEDs at a time, to which you can apply preconfigured light recipes – Galaxy, Ocean, Jungle, Volcano, and Omen – and apply an effect, such as wave, static, ambient, breathing, color cycle, an audio visualizer, and radial. The speed and direction of the effect is also configurable. You can also create layered effects and save everything in profiles that you can export or import. HP covers the HyperX Omen 35L with a standard one-year warranty.

We tested the HyperX Omen 35L with a Ryzen 9 9950X3D processor, 64GB of dual-channel DDR5-6000 RAM, GeForce RTX 5080 graphics, Windows 11 Pro, and two 1TB PCIe 5.0 solid-state drives. The system uses a 1,000W power supply and a 240 mm liquid CPU cooling with a built-in LCD display. This configuration represents the top of the stack, retailing for $6,210.98.

The entry-level is probably where the Omen 35L offers the least value – with standard liquid cooling and a modular power supply, this system is for premium builds. AMD-based starter configurations begin at $2,399.99 with a Ryzen 5 9600X or $2,589.99 with an Intel Core Ultra 5 250KF Plus. Standard components include a GeForce RTX 5060 Ti (8GB), 16GB of memory, and 1TB of PCIe 4.0 storage. Memory tops out at 128GB and two SSDs are supported up to 2TB each.

Primarily, the HyperX Omen 35L gets one thing right: it feels genuinely premium. Its sharp black-and-white design, quality lighting, quiet operation, and enthusiast-grade components like a modular power supply give it the polish it needs to compete against boutique builders and aftermarket systems. Its performance in our test system with a Ryzen 9 9950X3D and an RTX 5080 match the expectations for this lofty price point.

That said, it’s clear that this desktop is aimed at the more premium side of the market, as prices of the entry-level configurations are difficult to justify given their level of hardware. But if you have deep enough pockets for a well-equipped configuration, the HyperX Omen 35L is a highly compelling gaming desktop well worth considering alongside anything the market has to offer.

Charles Jefferies Freelance Reviewer Charles Jefferies is a freelance reviewer for Tom’s Hardware US. He covers laptop and desktop PCs, especially gaming models.

Key considerations

  • Investor positioning can change fast
  • Volatility remains possible near catalysts
  • Macro rates and liquidity can dominate flows

Reference reading

More on this site

Informational only. No financial advice. Do your own research.

Leave a Comment