Japan to mass-procure 3D-printed rocket-powered drone interceptor — Terra B1 capable of countering one-way attack platforms

by

Japan to mass-procure 3D-printed rocket-powered drone interceptor — Terra B1 capable of countering one-way attack platforms

Rocket-launched interceptors are designed to counter drones like the infamous Shahed.

When you purchase through links on our site, we may earn an affiliate commission. Here’s how it works .

The Japanese Acquisition, Technology, and Logistics Agency (ATLA) is the body that rubberstamped the deal with Terra Drone. According to a press release from the latter, the Terra B1 is being mass-produced in Japan after successfully passing trials. It was just one of a range of designs put forward by 38 separate companies. To be chosen by ALTA, the B1 had to satisfy a number of criteria such as “effective range, flight duration, flight distance, maximum and cruising speed, guidance method, number of aircraft that can be controlled simultaneously, launch and recovery methods, integration with other systems, safety measures, [and] operational track record,” says Terra Drone. The first Terra B1 interceptors are expected off the domestic production lines sometime this month.

We witnessed the clamor for cheap and effective anti-drone solutions when the conflict between the U.S. and Iran erupted earlier this year. Gulf states seen as U.S. allies or sympathizers were repeatedly targeted by airborne Iranian threats, but their anti-air missiles weren’t designed to counter such attacks. Patriot missiles, for example, are too expensive and in too short supply to match drone threats 1-to-1. It wasn’t sustainable. It didn’t take long, therefore, for battle-proven Ukrainian anti-drone tech to be bought in.

Now we see Japan proactively following the cheap-yet-effective drone interceptor route. 3D printing is another emerging tech that will be applied here to enable Japan’s Self-Defense Forces “to acquire more effective drone countermeasure equipment with greater speed.” After a successful initial deployment by the Maritime Self-Defense Force, Japan’s Air Self-Defense Force and Ground Self-Defense Force may also look at customizing Terra B1 interceptors for their needs.

This isn't the first example of important synergies between drone and 3D printing technologies. We also recently reported on drones, drone parts, and other maintenance and repair essentials being 3D printed aboard the USS Essex . This was all done inside a compact containerized factory as the ship sailed to take part in RIMPAC 2026 around Hawaii.

US Navy 3D prints combat-ready drones and 1,000+ parts aboard aircraft carrier during exercise

Startup raises $7 million to build backpack-portable 8.8-ounce drone interceptors

Anti-drone chain gun with 50mm precision-guided ammunition unveiled

Key considerations

  • Investor positioning can change fast
  • Volatility remains possible near catalysts
  • Macro rates and liquidity can dominate flows

Reference reading

More on this site

Informational only. No financial advice. Do your own research.

Related posts:

  1. Japan to mass-procure 3D-printed rocket-powered drone interceptor — Terra B1 capable of countering one-way attack platforms
  2. Japan to mass-procure 3D-printed rocket-powered drone interceptor — Terra B1 capable of countering one-way attack platforms
  3. Japan to mass-procure 3D-printed rocket-powered drone interceptor — Terra B1 capable of countering one-way attack platforms
  4. Japan to mass-procure 3D-printed rocket-powered drone interceptor — Terra B1 capable of countering one-way attack platforms

Leave a Comment