When you purchase through links on our site, we may earn an affiliate commission. Here’s how it works .
Watch On The video above explains the concept of the stack effect pertaining to its foundation, natural convection, in great detail. Also known as the chimney effect, it relies on differences in indoor-to-outdoor air density, which are dictated by differences in temperature and humidity. The bottom of the chimney becomes a low-pressure zone, sucking in cold air that escapes through the low-pressure exit at the top.
In the experiment, der8auer uses a fog machine to show how a radiator can't "pull" air without fans attached to it; the hot air dissipating from the other side is forced to fall back on natural convection. The test bench was water-cooled and consisted of an AMD Ryzen 7 9800X3D, so he added a temperature probe to the fittings to monitor the water temp as well. The experiment then begins with the first 3D-printed chimney that's 10cm tall — it barely works, but temps already start to drop by 0.5 degrees.
At this point, the water was at 61°C and der8auer added another 20cm chimney atop the previous one, making the enclosure 30cm tall in total. This made the temps drop by another 5 degrees over a 30-minute stabilization period. The fog machine didn't really show any difference in the airflow, however. Now, it was time for the big boy: an 80cm tall chimney made up of 4x 20cm parts, bringing the total height to 110cm.
Right away, temperatures began dropping below 55°C before the modder could even set up his camera for the ultrawide framing this setup warranted. Just five minutes later, the water had hit 50°C, but the visual demonstration really sealed the deal. Turning on the fog machine underneath the radiator showed air being pulled through the chimney as if there were fans facilitating airflow on top.
Custom-built passive water-cooled PC relies on convection chimney effect powered by triple-stacked radiators
Enthusiast hides gaming PC inside living room fan using 3D-printed parts
Key considerations
- Investor positioning can change fast
- Volatility remains possible near catalysts
- Macro rates and liquidity can dominate flows
Reference reading
- https://www.tomshardware.com/pc-components/cooling/SPONSORED_LINK_URL
- https://www.tomshardware.com/pc-components/cooling/modder-der8auer-builds-110cm-3d-printed-chimney-to-passively-cool-ryzen-7-9800x3d-without-fans-radically-simple-pc-mod-cuts-down-cpu-temps-by-19-c-using-the-stack-effect#main
- https://www.tomshardware.com/membership
- AMD's new Radeon RX 9050 is roughly 30% slower than the RTX 5050 in games, early testing shows — the cheapest 8GB RDNA 4 GPU comfortably handles 1080p gaming bu
- Tom’s Hardware’s 30th Anniversary — From Intel feuds and DIP switches to 30 years of unbiased testing
- Nvidia's fastest graphics cards get US price increase at Best Buy, Amazon — Astral RTX 5080 now costs more than 5090's MSRP, flagship card now commands more tha
- Exploring Apple Silicon’s local AI performance with the Mac Studio and M4 Max — M4 Max beats GB10 and Strix Halo in decode throughput, but memory bandwidth isn'
- Shanghai Aishengna named as the maker of China's first domestic immersion DUV chipmaking tools — first viable domestic 7nm-capable scanner to be completed by 20
Informational only. No financial advice. Do your own research.