
GlobalFoundries unveils 7nm-class FDX Fusion node — comes 7 years after firm abandoned FinFET
GlobalFoundries VP details FDX Fusion technology, sporting 7nm-class performance without the need for EUV tools — company targets 2030 for high-volume manufacturing, with planar transistors in tow
Production of 2nm-class chips with GAA transistors and extreme ultraviolet lithography is exceptionally complicated, even for established chipmakers. So far, only Intel, TSMC, and Samsung have begun mass production of chips using nodes that rely on GAA devices. Unlike FinFETs, GAA transistors feature multiple vertically stacked silicon nanosheets surrounded by gate materials, which improves electrostatic control but introduces additional fabrication challenges. Furthermore, extremely small feature dimensions require exceptional precision in deposition, etching, lithography, and process control. For Rapidus, which was founded only in 2022 and relies on process technology IP developed by IBM , the task of reproducing these processes consistently in a new fab represents an incredibly tall task.
One potential problem involves selective removal of silicon-germanium (SiGe) layers that separate silicon nanosheets during fabrication. These sacrificial layers must be removed without damage to the silicon channels or significant changes to their dimensions. Insufficient etching can leave unwanted material between nanosheets, whereas excessive etching can reduce channel thickness or increase surface roughness. A research paper published by imec identifies nanosheet release as one of the critical challenges of GAA manufacturing, particularly because variations in channel geometry can affect transistor performance and consistency.
In fact, EUV lithography itself introduces additional complications. At extremely small dimensions, stochastic effects associated with photon absorption, resist chemistry, and subsequent pattern transfer can produce variations in feature dimensions, edge roughness, and occasional missing or malformed structures. Such defects can affect pretty much everything, including transistor gates, contacts, and interconnects. In fact, there is a company called Fractilia that specializes solely in stochastic controls. Although individual test transistors may function correctly, circuits with millions of interconnected devices are much more vulnerable to failures caused by stochastic defects.
Another potential challenge concerns inner spacer formation. These extremely small dielectric structures electrically isolate the gate from the source and drain regions. Their fabrication requires precise lateral etching of SiGe followed by dielectric deposition. Variations in spacer geometry can affect effective gate length, parasitic capacitance, leakage current, and transistor performance. A paper published in Nanomaterials in January 2026 demonstrates that even subtle differences in etching conditions can affect spacer geometry and nanosheet integrity, which potentially introduces electrical variability that becomes particularly problematic in SRAM circuits.
Gate stack integration presents another possible source of difficulties. GAA fabrication requires conformal deposition of gate dielectrics and metal materials around multiple nanosheets, including narrow spaces between them. Variations in material thickness, interfaces, and effective metal work function can alter transistor threshold voltages, which is not a big problem for individual transistors or tiny test patterns. However, for SRAM structures, excessive differences between nominally identical transistors can reduce read, write, and retention margins, which could prevent cells from operating reliably at their intended voltages and greatly narrow the manufacturing process window.
Finally, contact resistance, interconnect defects, and particle contamination can further complicate circuit integration. Bloomberg specifically reports that Rapidus is working to improve dust and particle control in its cleanroom. Normally, there might be no connection between contamination and the SRAM woes the company is experiencing. However, one of the distinct features of IIM-1 is that it uses an unconventional grid-based wafer transportation system to enable its single-batch processing as well as increase the efficiency of expedited processing. Usage of this system raises questions about whether the new infrastructure has undergone sufficient contamination and reliability qualification, though, again, a transportation system alone could not be responsible for zero (or near-zero) SRAM yield.
Rapidus reportedly stresses that it remains committed to mass production in the second half of fiscal 2027. However, until the company demonstrates functional SRAM and subsequently larger integrated circuits, questions about its ability to manufacture commercially viable 2nm chips will persist.
Anton Shilov Social Links Navigation Contributing Writer Anton Shilov is a contributing writer at Tom’s Hardware. Over the past couple of decades, he has covered everything from CPUs and GPUs to supercomputers and from modern process technologies and latest fab tools to high-tech industry trends.
Key considerations
- Investor positioning can change fast
- Volatility remains possible near catalysts
- Macro rates and liquidity can dominate flows
Reference reading
- https://www.tomshardware.com/tech-industry/semiconductors/SPONSORED_LINK_URL
- https://www.tomshardware.com/tech-industry/semiconductors/rapidus-reportedly-struggles-to-produce-working-sram-on-its-2nm-node-putting-2027-mass-production-at-risk-company-faces-significant-challenges-using-euv-to-develop-gaa-transistors#main
- https://www.tomshardware.com/my-account
- NVIDIA Expands Slurm to Bring Quantum Computing Into Supercomputing
- A New Dawn in the Cloud: ‘Warhammer 40,000: Dawn of War IV’ Is Coming to GeForce NOW
- Lawyer’s $9,450 private AI server with 12 used Nvidia V100s now runs every DeepSeek V4.1 Flash expert
- Best Black Friday gaming chair deals 2026
- How the World’s Most Advanced AI Infrastructure Supply Chain Invents the Future
Informational only. No financial advice. Do your own research.