Builder customizes 3D-printed PC case with worthwhile upgrades — premium 3D printing template with magnetically attached panels boasts ease of use, customizability, and design flair
Watch On HTLL ended up going with a keyboard from Rii, but since that model only came with 2.4 GHz connectivity with a dongle, he was then compelled to add a USB hub. Next, he opted among different speaker sizes and chose the 2-inch as the Goldilocks one, as the smaller drivers didn't have the oomph he desired.
As any 3D printing enthusiast reading this will likely predict, designing the phone holder was one of the two hardest parts of the project. Despite having tons of hardware, he was ironically bereft of a 3D scanner. That made designing the holder a many-print affair, as finding the sweet spot between the holder being loose enough to fit the phone and tight enough to hold it in place was tricky. Figuring out just the right depth to fit the magnetic USB-C connector was a challenge, too.
The step of designing a competent hinge was equally tricky. 3D printing a hinge is easy enough, but HTLL wanted one that was both made of metal and was adjustable like laptop hinges are via a screw. He recommends ThinkPad hinges for your own DIY projects.
After some screws, washers, and foldable feet that turned out unnecessary, the project was complete. When folded, with the side carrying handle, the deck is reminiscent of 80s multi-cassette cases, except it's about half the volume. The next step could be adding a VR headset to it, and pretend you're Case from Neuromancer on his Ono-Sendai deck.
Get Tom's Hardware's best news and in-depth reviews, straight to your inbox.
Key considerations
- Investor positioning can change fast
- Volatility remains possible near catalysts
- Macro rates and liquidity can dominate flows
Reference reading
- https://www.tomshardware.com/3d-printing/SPONSORED_LINK_URL
- https://www.tomshardware.com/3d-printing/tech-modder-rolls-his-own-foldable-portable-cyberdeck-with-integrated-keyboard-speakers-and-usb-hub-phone-transformed-into-portable-pc-inside-3d-printed-case#main
- https://www.tomshardware.com
- Open source project brings 53-year-old interface to USB — GPIB adapter v3 adds integrated Ethernet port with PoE
- Make Spirits Bright With Holiday Hits on GeForce NOW
- Razer's Hanbo AIO coolers up to 70 percent off, drop as low as $29 in clearance deal — Chroma RGB CPU coolers fall to extreme budget territory, with 360mm model
- New York's Mayoral Inauguration bans Raspberry Pi and Flipper Zero — devices join explosives, guns, drones, and beach balls on prohibited items list
- LG's dual-mode 4K 240Hz / 1080p 480Hz OLED gaming monitor is 42% off — premium flagship panel with HDR1300 drops to its lowest-ever price
Informational only. No financial advice. Do your own research.