Synopsys validates a PCIe 6.0 PHY inside a face-to-face 3D stack at 64 GT/s — says it got there by pulling apart an existing 2D test chip

by

Synopsys validates a PCIe 6.0 PHY inside a face-to-face 3D stack at 64 GT/s — says it got there by pulling apart an existing 2D test chip

In monolithic chips, PCIe PHYs sit at the perimeter of the die, right next to the package I/O connections, helping keep traces to the substrate short so attenuation and reflections remain manageable. A 2.5D package preserves that layout by parking the PHYs along the outer edge of the outermost chiplets. Face-to-face hybrid bonding removes the option. The bottom die is flipped so its redistribution layer meets the redistribution layer of the logic die above it, which leaves the PCIe PHYs facing away from the substrate they need to reach. Instead, the signals travel down through vias cut into the silicon.

Every TSV passes through active silicon and needs a buffer around it, so the vias can't be dropped wherever the PHY happens to sit. "You rarely drill straight down into the package substrate," Manmeet Walia, executive director of product management at Synopsys, said to Electronic Design , which reported that routing has to climb to one of the upper metal layers and reverse direction before descending.

Walia told the publication that electromigration and layout rules change substantially in 3D, that via count is a tradeoff between bandwidth and signals corrupting each other, and that customer logic sitting over the PHY's path down to the substrate is a challenge that Synopsys expects to work through iteratively, design by design. PAM4 leaves less room for that kind of error than the NRZ signaling used through PCIe 5.0, since it packs two bits into each symbol.

Fujitsu's Monaka processor takes the opposite approach, instead stacking four N2 compute chiplets carrying 144 Armv9 cores face-to-face on N5 SRAM chiplets using hybrid copper bonding, then putting the memory controllers and the PHYs for its 12 DDR5 channels on a separate and comparatively large I/O die rather than inside the bonded stack.

The current state of PCIe 6.0 SSDs and controllers

Key considerations

  • Investor positioning can change fast
  • Volatility remains possible near catalysts
  • Macro rates and liquidity can dominate flows

Reference reading

More on this site

Informational only. No financial advice. Do your own research.

Related posts:

  1. Synopsys validates a PCIe 6.0 PHY inside a face-to-face 3D stack at 64 GT/s — says it got there by pulling apart an existing 2D test chip
  2. Synopsys validates a PCIe 6.0 PHY inside a face-to-face 3D stack at 64 GT/s — says it got there by pulling apart an existing 2D test chip
  3. American startup Substrate promises 2nm-class chipmaking with particle accelerators, at a tenth of the cost of EUV — X-ray lithography system has potential to s
  4. American startup Substrate promises 2nm-class chipmaking with particle accelerators, at a tenth of the cost of EUV — X-ray lithography system has potential to s

Leave a Comment